Top Articles Buckle up, everyone! Let’s explore our picks for the best sinking office chair fix
1
MySit 2.2" Stroke Office Chair Gas Lift Cylinder Replacement, Heavy Duty 450lbs Shortest Gas Spring Rod Part Sinking 2.4 inches Universal Size Black for...
9.4
Amazon.com
2
MySit Gas Lift Cylinder Removal Tools 28mm/1.1-Inch, Removal Tools Sets for Replace Office Chair Cylinder, Fix Sinking Office Chair Stainless Steel Chair...
8.9
Amazon.com
3
Besitu 500Lbs Office Chair Replacement Parts, w/ 6'' x 10.2" Mounting Holes Chair Base Heavy Duty Plate Swivel Tilt Control Seat Mechanism for Executive and...
8.8
Amazon.com
The best sinking office chair fix
MySit 2.2" Stroke Office Chair Gas Lift Cylinder Replacement, Heavy Duty 450lbs Shortest Gas Spring Rod Part Sinking 2.4 inches Universal Size Black for...
$25.95
PRIMEPRIME
in stock
Amazon.com
Features
| Part Number | GasliftNEW-6 |
| Model | GasliftNEW-6 |
| Color | Black |
| Size | 2.2 Inch(Sinking 2.4") |
- CLASS 4 LEVEL GAS LIFT CYLINDER -- This heavy duty gas lift cylinder made with high construction industry standard (BIFMA Plus Qaulity) for short person or high chair base.
- ADJUSTABLE HEIGHT 2.2 INCH -- Adjustable Height 2.2 Inch, the fully expanded height is 10.7 inch, the fully compressed height is 8.5 inch, which suitable for short person .
- REPLACEMENT PARTS FOR OFFICE CHAIR -- Universal size replacement for high chair base. After installation, the cylinder's bottom to the chair base feet center hole length is 2.4"(6cm), so the legs height of the chair must over 2.4"(6cm), or it will affect the chairs moving.
- HEAVY DUTY 450LBs CHAIR PISTON -- MySit office chair gas lift cylinder holds up to 450lbs for most office chair, executive chair, computer chair, gaming chair. Full 360 degree rotation, smooth and without noise move to all directions.
- EASY TO INSTALL -- You can installed easily without additional screws required, fix your sinking office chair by this standard size replacement chair piston instead of purchasing a new chair.
MySit Gas Lift Cylinder Removal Tools 28mm/1.1-Inch, Removal Tools Sets for Replace Office Chair Cylinder, Fix Sinking Office Chair Stainless Steel Chair...
$23.99
PRIMEPRIME
in stock
Amazon.com
Features
| Part Number | GasliftNEW-1 |
| Model | GasliftNEW-1 |
| Color | Black |
| Size | 1.1 Inch(28mm) |
- DURABLE CHAIR CYLINDER REMOVAL TOOLS KIT -- Mysit adjustable office chair cylinder removal tools are made of durable stainless steel. Package inludes 2pcs stainless steel cylinder clamp shafts, 2pcs long bolts, 1pc L wrench.
- REPLACE GAS LIFT CYLINDER USE -- No other tools required, using this tool set to remove/replace many years sinking gas cylinder, let disassemble easily to save your strength and time.
- NOTICE FOR CYLINDER REPLACEMENT: 1.Install the top ring collars on cylinder(using short screws), make sure this ring CAN slide along the cylinder; 2.Install the below ring collars on cylinder(using short screws), make sure this below ring tightly enough and CANNOT slide; 3.Install and tighten 2 long screws on below ring ALTERNATELY, to avoid the below rings tilt and cannot disassembly.
- UNIVERSAL SIZE 28MM -- Office chair stainless steel removal tool kit fits for most office chairs (stools, executive chairs, office chairs, gaming chairs) with a cylinder within 1.1"(28mm) diameter.
- FIX SINKING OFFICE CHAIR USE -- Universal size fits all height adjusting cylinder chairs, office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, the office chair replacement parts can hold weight up to 600 pounds. It takes few minutes only, please adjusting the height of the chair you need before install this chair adjustable saver.
Besitu 500Lbs Office Chair Replacement Parts, w/ 6'' x 10.2" Mounting Holes Chair Base Heavy Duty Plate Swivel Tilt Control Seat Mechanism for Executive and...
$41.98
PRIMEPRIME
in stock
Amazon.com
Features
| Part Number | Heavy Duty 500LBs Tilt Mechanism |
| Model | w/ 6'' x 10.2" Seat Mechanism |
| Color | Black |
| Size | 6''x10.2"-500LBS |
- 【STANDARD SIZE】Replacement office chair tilt mechanism fit for the office chair with 10.2" long x 6" wide screw mounting holes center distance. Please verify your mounting holes measurements before purchasing.
- 【HEAVY DUTY 500LBs】This swivel tilt seat mechanism is much sturdier that the average mechanism, with a thick, sturdy retaining collar where the lift cylinder fits into, being able to withstand 500 lbs of standard use. Also the tilt tension knob provides greater tension for a large person.
- 【TILT CONTROL MECHANISM】The bracket is made of the 0.12" thicken solid steel and last a long time. Even the handle rod is twice as thick. Single lever for gas lift cylinders height activation, accepts standard Dia. 28mm(1.1-Inch) tapered gas lift cylinders.
- 【TIME & MONEY SAVER】Saved time and money having to buy another expensive office or gaming chair. Just purchasing the part we needed and easily replaced the existing broken unit.
- 【ATTENTION】Please check bolt pattern and measure the seat mechanism size before ordering in case of not fitting. Contact us freely if you have any questions and problems.
Want the scoop?
How to stop your chair from sinking
Fix Your Sinking Desk Chair with These Simple Steps
There's nothing more irksome than a desk chair that sinks... little... by... little... until you're almost on the floor! This quick video will ...
Annoyed That Your Office Chair Keeps Sinking? 3 Easy Fixes
Cylinder Replacement Kit: https://links.theofficeoasis.com/amazon/cylinderYT2 In this video, Kevin shows the three options to fix ...
